Connecting An Orbit 40 To A Computer Running NVDA
Folks,
In order to connect an Orbit Research Orbit 40 Braille display to a computer running NVDA you must put the Orbit 40 into the varioultra40 emulation mode, and set the Orbit 40 to use the hid orbit USB connection type.
You must then go to the NVDA braille settings and select the Baum/Humanware/APH/Orbit braille displays driver. When I select this driver and hit OK, I get “Braille Display Error dialog Could not load the baum display.”.
Has anyone seen this error? Is anyone using an Orbit 40 with NVDA; if so, what is your braille driver setting?
I have tried the NVDA automatic mode Braille option and, while that loads, the Orbit 40 does not connect to it. Orbit research says this is an NVDA issue.
Any help would be appreciated.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
Folks,
I am running NVDA 2022.1 and Windows 10.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
Sent: Monday, July 4, 2022 5:38 AM
To: NVDA Discussion List (nvda@nvda.groups.io) <nvda@nvda.groups.io>
Subject: Connecting An Orbit 40 To A Computer Running NVDA
Folks,
In order to connect an Orbit Research Orbit 40 Braille display to a computer running NVDA you must put the Orbit 40 into the varioultra40 emulation mode, and set the Orbit 40 to use the hid orbit USB connection type.
You must then go to the NVDA braille settings and select the Baum/Humanware/APH/Orbit braille displays driver. When I select this driver and hit OK, I get “Braille Display Error dialog Could not load the baum display.”.
Has anyone seen this error? Is anyone using an Orbit 40 with NVDA; if so, what is your braille driver setting?
I have tried the NVDA automatic mode Braille option and, while that loads, the Orbit 40 does not connect to it. Orbit research says this is an NVDA issue.
Any help would be appreciated.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
Hello!
Please, try the following:
1 - Set Emulation to Off;
USB mode to HID;
In NVDA, set the Braille display to Auto...
Best regards,
Rui Fontes
NVDA portuguese team
Folks,
I am running NVDA 2022.1 and Windows 10.
From: Louis Maher
Sent: Monday, July 4, 2022 5:38 AM
To: NVDA Discussion List (nvda@nvda.groups.io) <nvda@nvda.groups.io>
Subject: Connecting An Orbit 40 To A Computer Running NVDA
Folks,
In order to connect an Orbit Research Orbit 40 Braille display to a computer running NVDA you must put the Orbit 40 into the varioultra40 emulation mode, and set the Orbit 40 to use the hid orbit USB connection type.
You must then go to the NVDA braille settings and select the Baum/Humanware/APH/Orbit braille displays driver. When I select this driver and hit OK, I get “Braille Display Error dialog Could not load the baum display.”.
Has anyone seen this error? Is anyone using an Orbit 40 with NVDA; if so, what is your braille driver setting?
I have tried the NVDA automatic mode Braille option and, while that loads, the Orbit 40 does not connect to it. Orbit research says this is an NVDA issue.
Any help would be appreciated.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
Thank you Rui.
Unfortunately this did not work.
Thanks for the suggestion.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
Sent: Monday, July 4, 2022 6:03 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] FW: Thank you Rui.
Connecting An Orbit 40 To A Computer Running NVDA
Hello!
Please, try the following:
1 - Set Emulation to Off;
USB mode to HID;
In NVDA, set the Braille display to Auto...
Best regards,
Rui Fontes
NVDA portuguese team
Às 11:42 de 04/07/2022, Louis Maher escreveu:
Folks,
I am running NVDA 2022.1 and Windows 10.
From: Louis Maher
Sent: Monday, July 4, 2022 5:38 AM
To: NVDA Discussion List (nvda@nvda.groups.io) <nvda@nvda.groups.io>
Subject: Connecting An Orbit 40 To A Computer Running NVDA
Folks,
In order to connect an Orbit Research Orbit 40 Braille display to a computer running NVDA you must put the Orbit 40 into the varioultra40 emulation mode, and set the Orbit 40 to use the hid orbit USB connection type.
You must then go to the NVDA braille settings and select the Baum/Humanware/APH/Orbit braille displays driver. When I select this driver and hit OK, I get “Braille Display Error dialog Could not load the baum display.”.
Has anyone seen this error? Is anyone using an Orbit 40 with NVDA; if so, what is your braille driver setting?
I have tried the NVDA automatic mode Braille option and, while that loads, the Orbit 40 does not connect to it. Orbit research says this is an NVDA issue.
Any help would be appreciated.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
Here with my old Orbit 20, it worked...
Did you set Mode to USB?
Rui Fontes
Thank you Rui.
Unfortunately this did not work.
Thanks for the suggestion.
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Monday, July 4, 2022 6:03 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] FW: Thank you Rui.
Connecting An Orbit 40 To A Computer Running NVDA
Hello!
Please, try the following:
1 - Set Emulation to Off;
USB mode to HID;
In NVDA, set the Braille display to Auto...
Best regards,
Rui Fontes
NVDA portuguese team
Às 11:42 de 04/07/2022, Louis Maher escreveu:
Folks,
I am running NVDA 2022.1 and Windows 10.
From: Louis Maher
Sent: Monday, July 4, 2022 5:38 AM
To: NVDA Discussion List (nvda@nvda.groups.io) <nvda@nvda.groups.io>
Subject: Connecting An Orbit 40 To A Computer Running NVDA
Folks,
In order to connect an Orbit Research Orbit 40 Braille display to a computer running NVDA you must put the Orbit 40 into the varioultra40 emulation mode, and set the Orbit 40 to use the hid orbit USB connection type.
You must then go to the NVDA braille settings and select the Baum/Humanware/APH/Orbit braille displays driver. When I select this driver and hit OK, I get “Braille Display Error dialog Could not load the baum display.”.
Has anyone seen this error? Is anyone using an Orbit 40 with NVDA; if so, what is your braille driver setting?
I have tried the NVDA automatic mode Braille option and, while that loads, the Orbit 40 does not connect to it. Orbit research says this is an NVDA issue.
Any help would be appreciated.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
I have no Braille display, but I read about this problem somewhere in passing, so maybe there is another way to make them talk to each other. Would you not have thought that their other model might share the same drivers?
Brian
--
bglists@...
Sent via blueyonder.(Virgin media)
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
From: "Louis Maher" <ljmaher03@...>
To: <nvda@nvda.groups.io>
Sent: Monday, July 04, 2022 11:42 AM
Subject: [nvda] FW: Connecting An Orbit 40 To A Computer Running NVDA
Folks,
I am running NVDA 2022.1 and Windows 10.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
From: Louis Maher
Sent: Monday, July 4, 2022 5:38 AM
To: NVDA Discussion List (nvda@nvda.groups.io) <nvda@nvda.groups.io>
Subject: Connecting An Orbit 40 To A Computer Running NVDA
Folks,
In order to connect an Orbit Research Orbit 40 Braille display to a computer running NVDA you must put the Orbit 40 into the varioultra40 emulation mode, and set the Orbit 40 to use the hid orbit USB connection type.
You must then go to the NVDA braille settings and select the Baum/Humanware/APH/Orbit braille displays driver. When I select this driver and hit OK, I get "Braille Display Error dialog Could not load the baum display.".
Has anyone seen this error? Is anyone using an Orbit 40 with NVDA; if so, what is your braille driver setting?
I have tried the NVDA automatic mode Braille option and, while that loads, the Orbit 40 does not connect to it. Orbit research says this is an NVDA issue.
Any help would be appreciated.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...<mailto:ljmaher03@...>
Hello Rui,
The Orbit 20 no longer needs to emulate a vario Braille display. I think the problem is that I am unable to load the
Baum/Humanware/APH/Orbit braille displays driver in NVDA.
I did set the mode to USB.
Thanks for your suggestions.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
Sent: Monday, July 4, 2022 6:27 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] FW: Connecting An Orbit 40 To A Computer Running NVDA
Here with my old Orbit 20, it worked...
Did you set Mode to USB?
Rui Fontes
Às 12:17 de 04/07/2022, Louis Maher escreveu:
Thank you Rui.
Unfortunately this did not work.
Thanks for the suggestion.
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Monday, July 4, 2022 6:03 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] FW: Thank you Rui.
Connecting An Orbit 40 To A Computer Running NVDA
Hello!
Please, try the following:
1 - Set Emulation to Off;
USB mode to HID;
In NVDA, set the Braille display to Auto...
Best regards,
Rui Fontes
NVDA portuguese teamÀs 11:42 de 04/07/2022, Louis Maher escreveu:
Folks,
I am running NVDA 2022.1 and Windows 10.
From: Louis Maher
Sent: Monday, July 4, 2022 5:38 AM
To: NVDA Discussion List (nvda@nvda.groups.io) <nvda@nvda.groups.io>
Subject: Connecting An Orbit 40 To A Computer Running NVDA
Folks,
In order to connect an Orbit Research Orbit 40 Braille display to a computer running NVDA you must put the Orbit 40 into the varioultra40 emulation mode, and set the Orbit 40 to use the hid orbit USB connection type.
You must then go to the NVDA braille settings and select the Baum/Humanware/APH/Orbit braille displays driver. When I select this driver and hit OK, I get “Braille Display Error dialog Could not load the baum display.”.
Has anyone seen this error? Is anyone using an Orbit 40 with NVDA; if so, what is your braille driver setting?
I have tried the NVDA automatic mode Braille option and, while that loads, the Orbit 40 does not connect to it. Orbit research says this is an NVDA issue.
Any help would be appreciated.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
I believe the trouble is that I can not load the "Baum/Humanware/APH/Orbit braille displays" driver in NVDA.
Orbit research says they can load this driver in NVDA.
Thank you for your suggestions.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian's Mail list account via groups.io
Sent: Monday, July 4, 2022 9:50 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Connecting An Orbit 40 To A Computer Running NVDA
Did I not read that the HID Braille drivers have quirks someplace? I know Google has not been able to do the system on their bluetooth systems in Android.
I have no Braille display, but I read about this problem somewhere in passing, so maybe there is another way to make them talk to each other.
Would you not have thought that their other model might share the same drivers?
Brian
--
bglists@...
Sent via blueyonder.(Virgin media)
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Louis Maher" <ljmaher03@...>
To: <nvda@nvda.groups.io>
Sent: Monday, July 04, 2022 11:42 AM
Subject: [nvda] FW: Connecting An Orbit 40 To A Computer Running NVDA
Folks,
I am running NVDA 2022.1 and Windows 10.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...
From: Louis Maher
Sent: Monday, July 4, 2022 5:38 AM
To: NVDA Discussion List (nvda@nvda.groups.io) <nvda@nvda.groups.io>
Subject: Connecting An Orbit 40 To A Computer Running NVDA
Folks,
In order to connect an Orbit Research Orbit 40 Braille display to a computer
running NVDA you must put the Orbit 40 into the varioultra40 emulation mode,
and set the Orbit 40 to use the hid orbit USB connection type.
You must then go to the NVDA braille settings and select the
Baum/Humanware/APH/Orbit braille displays driver. When I select this driver
and hit OK, I get "Braille Display Error dialog Could not load the baum
display.".
Has anyone seen this error? Is anyone using an Orbit 40 with NVDA; if so,
what is your braille driver setting?
I have tried the NVDA automatic mode Braille option and, while that loads,
the Orbit 40 does not connect to it. Orbit research says this is an NVDA
issue.
Any help would be appreciated.
Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher03@...<mailto:ljmaher03@...>