Questions About Vocalizer for NVDA


Bhavya shah
 

Dear all,

I am looking at procuring Vocalizer (and perhaps Eloquence too) for
NVDA, and see that there are a few providers (CodeFactory,
Tiflotecnia, and perhaps others). Having briefly experimented with the
trial version of one, I have the following questions as I determine
whom to purchase from:
* Which, if any, support automatic language switching? Using the
CodeFactory bundle 1.1 with NVDA 2021.3.5, neither Eloquence nor
Vocalizer seemed to be able to auto-switch despite that option being
enabled in Voice Settings.
* Which tends to be updated for compatibility with new NVDA releases
most promptly?
* What are other differences that should be accounted for in one's decision?

I would greatly appreciate any suggestions and experiences on this.

Kind Regards,
Bhavya Shah
B.S. in Mathematical and Computational Science | Stanford '24
LinkedIn: https://www.linkedin.com/in/bhavyashah125/


Rui Fontes
 

Hello!


I'm a bit of a suspect, since I'm from Tiflotecnia...


But, let's see:

* Which, if any, support automatic language switching? Using the
CodeFactory bundle 1.1 with NVDA 2021.3.5, neither Eloquence nor
Vocalizer seemed to be able to auto-switch despite that option being
enabled in Voice Settings.

Our Vocalizer works very good in that feature...

And, for people using no latin characters, like chinese, japonese, cyrilic, hebrew or arabic, even on apps not informing the screen reader to change language, our Vocalizer changes automatically based on the type of characters...



* Which tends to be updated for compatibility with new NVDA releases
most promptly?

Ours. We have already the new driver to publish it today or tomorrow...



* What are other differences that should be accounted for in one's decision?

Our technical support is better andfaster...


Rui Fontes

Tiflotecnia, Lda.


David Mehler
 

Hello,

Also with regards Vocalizer will the 2.1 nvda.addon be updated for
2022.1 compatibility?

Thanks.
DAve.

On 5/12/22, Rui Fontes <rui.fontes@tiflotecnia.com> wrote:
Hello!


I'm a bit of a suspect, since I'm from Tiflotecnia...


But, let's see:

* Which, if any, support automatic language switching? Using the
CodeFactory bundle 1.1 with NVDA 2021.3.5, neither Eloquence nor
Vocalizer seemed to be able to auto-switch despite that option being
enabled in Voice Settings.

Our Vocalizer works very good in that feature...

And, for people using no latin characters, like chinese, japonese,
cyrilic, hebrew or arabic, even on apps not informing the screen reader
to change language, our Vocalizer changes automatically based on the
type of characters...



* Which tends to be updated for compatibility with new NVDA releases
most promptly?

Ours. We have already the new driver to publish it today or tomorrow...



* What are other differences that should be accounted for in one's
decision?

Our technical support is better andfaster...


Rui Fontes

Tiflotecnia, Lda.








Rui Fontes
 

The driver for the old Vocalizer is already updated on the web page...


The direct link is:

https://www.tiflotecnia.net/Instal/vocalizer-driver_2.1.3.nvda-addon


Best regards,

Rui Fontes
Tiflotecnia, Lda.



Às 23:41 de 12/05/2022, David Mehler escreveu:

Hello,

Also with regards Vocalizer will the 2.1 nvda.addon be updated for
2022.1 compatibility?

Thanks.
DAve.


On 5/12/22, Rui Fontes <rui.fontes@tiflotecnia.com> wrote:
Hello!


I'm a bit of a suspect, since I'm from Tiflotecnia...


But, let's see:

* Which, if any, support automatic language switching? Using the
CodeFactory bundle 1.1 with NVDA 2021.3.5, neither Eloquence nor
Vocalizer seemed to be able to auto-switch despite that option being
enabled in Voice Settings.
Our Vocalizer works very good in that feature...

And, for people using no latin characters, like chinese, japonese,
cyrilic, hebrew or arabic, even on apps not informing the screen reader
to change language, our Vocalizer changes automatically based on the
type of characters...



* Which tends to be updated for compatibility with new NVDA releases
most promptly?
Ours. We have already the new driver to publish it today or tomorrow...



* What are other differences that should be accounted for in one's
decision?
Our technical support is better andfaster...


Rui Fontes

Tiflotecnia, Lda.









Bhavya shah
 

Dear Rui,

That sounds great. Is a demo/trial version available? I am reading
your documentation and it says: "... if you want to try out the
product before you buy it, please contact Tiflotecnia, Lda or your
local Vocalizer for NvDA dealer." Please let me know if I should be
reaching out to you or another representative offlist.

Thanks.

On 5/12/22, Rui Fontes <rui.fontes@tiflotecnia.com> wrote:
The driver for the old Vocalizer is already updated on the web page...


The direct link is:

https://www.tiflotecnia.net/Instal/vocalizer-driver_2.1.3.nvda-addon


Best regards,

Rui Fontes
Tiflotecnia, Lda.



Às 23:41 de 12/05/2022, David Mehler escreveu:
Hello,

Also with regards Vocalizer will the 2.1 nvda.addon be updated for
2022.1 compatibility?

Thanks.
DAve.


On 5/12/22, Rui Fontes <rui.fontes@tiflotecnia.com> wrote:
Hello!


I'm a bit of a suspect, since I'm from Tiflotecnia...


But, let's see:

* Which, if any, support automatic language switching? Using the
CodeFactory bundle 1.1 with NVDA 2021.3.5, neither Eloquence nor
Vocalizer seemed to be able to auto-switch despite that option being
enabled in Voice Settings.
Our Vocalizer works very good in that feature...

And, for people using no latin characters, like chinese, japonese,
cyrilic, hebrew or arabic, even on apps not informing the screen reader
to change language, our Vocalizer changes automatically based on the
type of characters...



* Which tends to be updated for compatibility with new NVDA releases
most promptly?
Ours. We have already the new driver to publish it today or tomorrow...



* What are other differences that should be accounted for in one's
decision?
Our technical support is better andfaster...


Rui Fontes

Tiflotecnia, Lda.













--
Kind Regards,
Bhavya Shah
B.S. in Mathematical and Computational Science | Stanford '24
LinkedIn: https://www.linkedin.com/in/bhavyashah125/


mr Krit Kumar kedia
 

Hello,
I heard the messages above, and I think you are finding a good vocaliser to use with NVDA.
I have a  suggestion for you,
try out INDO NVDA!
It is a software almost the NVDA infact mostly NVDA! which offers vocalizer support, and other  alequence voices as well produced by Saksham!
It's  a paid software, but really helpful.

Best,
Thank you,
Krit Kedia 
diving into the world of technology!
+91, India 



On Sat, May 14, 2022 at 9:59 AM Bhavya shah <bhavya.shah125@...> wrote:
Dear Rui,

That sounds great. Is a demo/trial version available? I am reading
your documentation and it says: "... if you want to try out the
product before you buy it, please contact Tiflotecnia, Lda or your
local Vocalizer for NvDA dealer." Please let me know if I should be
reaching out to you or another representative offlist.

Thanks.

On 5/12/22, Rui Fontes <rui.fontes@...> wrote:
> The driver for the old Vocalizer is already updated on the web page...
>
>
> The direct link is:
>
> https://www.tiflotecnia.net/Instal/vocalizer-driver_2.1.3.nvda-addon
>
>
> Best regards,
>
> Rui Fontes
> Tiflotecnia, Lda.
>
>
>
> Às 23:41 de 12/05/2022, David Mehler escreveu:
>> Hello,
>>
>> Also with regards Vocalizer will the 2.1 nvda.addon be updated for
>> 2022.1 compatibility?
>>
>> Thanks.
>> DAve.
>>
>>
>> On 5/12/22, Rui Fontes <rui.fontes@...> wrote:
>>> Hello!
>>>
>>>
>>> I'm a bit of a suspect, since I'm from Tiflotecnia...
>>>
>>>
>>> But, let's see:
>>>
>>> * Which, if any, support automatic language switching? Using the
>>>> CodeFactory bundle 1.1 with NVDA 2021.3.5, neither Eloquence nor
>>>> Vocalizer seemed to be able to auto-switch despite that option being
>>>> enabled in Voice Settings.
>>>
>>> Our Vocalizer works very good in that feature...
>>>
>>> And, for people using no latin characters, like chinese, japonese,
>>> cyrilic, hebrew or arabic, even on apps not informing the screen reader
>>> to change language, our Vocalizer changes automatically based on the
>>> type of characters...
>>>
>>>
>>>
>>>> * Which tends to be updated for compatibility with new NVDA releases
>>>> most promptly?
>>>
>>> Ours. We have already the new driver to publish it today or tomorrow...
>>>
>>>
>>>
>>>> * What are other differences that should be accounted for in one's
>>>> decision?
>>>
>>> Our technical support is better andfaster...
>>>
>>>
>>> Rui Fontes
>>>
>>> Tiflotecnia, Lda.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>


--
Kind Regards,
Bhavya Shah
B.S. in Mathematical and Computational Science | Stanford '24
LinkedIn: https://www.linkedin.com/in/bhavyashah125/






Abhishek Raut
 

Hello.
I have seen all the messages, And I would like to suggest you, Don't go for indo nvda and code factory Vocalizer.
I have bought the code factory Vocalizer, and It do not deserve the value which we paid.
I am Using voices for marathi, and, hindi.
These voices are very bad in quality, doesn't matter you install pro, or any quality.
About Indo nvda, it is nothing but code factory Vocalizer.
I don't know the price of indo nvda, but it maybe expensive than code factory.
I have bought code factory for 6000 INR, and maybe indo nvda is more expensive than it.
Also the code factory services too bad.
I did mail them to many times, but the frequency of getting reply is very less.
Other here mention, I don't used that. But I suggest, Take a good trial, then purchase.
Thank you



On Sat, May 14, 2022 at 1:03 PM mr Krit Kumar kedia <kritparagkedia@...> wrote:
Hello,
I heard the messages above, and I think you are finding a good vocaliser to use with NVDA.
I have a  suggestion for you,
try out INDO NVDA!
It is a software almost the NVDA infact mostly NVDA! which offers vocalizer support, and other  alequence voices as well produced by Saksham!
It's  a paid software, but really helpful.

Best,
Thank you,
Krit Kedia 
diving into the world of technology!
+91, India 



On Sat, May 14, 2022 at 9:59 AM Bhavya shah <bhavya.shah125@...> wrote:
Dear Rui,

That sounds great. Is a demo/trial version available? I am reading
your documentation and it says: "... if you want to try out the
product before you buy it, please contact Tiflotecnia, Lda or your
local Vocalizer for NvDA dealer." Please let me know if I should be
reaching out to you or another representative offlist.

Thanks.

On 5/12/22, Rui Fontes <rui.fontes@...> wrote:
> The driver for the old Vocalizer is already updated on the web page...
>
>
> The direct link is:
>
> https://www.tiflotecnia.net/Instal/vocalizer-driver_2.1.3.nvda-addon
>
>
> Best regards,
>
> Rui Fontes
> Tiflotecnia, Lda.
>
>
>
> Às 23:41 de 12/05/2022, David Mehler escreveu:
>> Hello,
>>
>> Also with regards Vocalizer will the 2.1 nvda.addon be updated for
>> 2022.1 compatibility?
>>
>> Thanks.
>> DAve.
>>
>>
>> On 5/12/22, Rui Fontes <rui.fontes@...> wrote:
>>> Hello!
>>>
>>>
>>> I'm a bit of a suspect, since I'm from Tiflotecnia...
>>>
>>>
>>> But, let's see:
>>>
>>> * Which, if any, support automatic language switching? Using the
>>>> CodeFactory bundle 1.1 with NVDA 2021.3.5, neither Eloquence nor
>>>> Vocalizer seemed to be able to auto-switch despite that option being
>>>> enabled in Voice Settings.
>>>
>>> Our Vocalizer works very good in that feature...
>>>
>>> And, for people using no latin characters, like chinese, japonese,
>>> cyrilic, hebrew or arabic, even on apps not informing the screen reader
>>> to change language, our Vocalizer changes automatically based on the
>>> type of characters...
>>>
>>>
>>>
>>>> * Which tends to be updated for compatibility with new NVDA releases
>>>> most promptly?
>>>
>>> Ours. We have already the new driver to publish it today or tomorrow...
>>>
>>>
>>>
>>>> * What are other differences that should be accounted for in one's
>>>> decision?
>>>
>>> Our technical support is better andfaster...
>>>
>>>
>>> Rui Fontes
>>>
>>> Tiflotecnia, Lda.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>


--
Kind Regards,
Bhavya Shah
B.S. in Mathematical and Computational Science | Stanford '24
LinkedIn: https://www.linkedin.com/in/bhavyashah125/







--
Regards, Abhishek Raut


mr Krit Kumar kedia
 

Hello all,
The cost of the INDO NVDA is around 5000 Roopees 
I dont know exactly about the quality of the INDO NVDA as I have never used it but going through the feedback of my friends I suggested you.
You should have a try on it!
I think it offers trial period also.

Thank you,
Krit Kumar
a tech lover from somewhere!


On Sat, May 14, 2022 at 1:48 PM Abhishek Raut <raut.abhishek1109@...> wrote:
Hello.
I have seen all the messages, And I would like to suggest you, Don't go for indo nvda and code factory Vocalizer.
I have bought the code factory Vocalizer, and It do not deserve the value which we paid.
I am Using voices for marathi, and, hindi.
These voices are very bad in quality, doesn't matter you install pro, or any quality.
About Indo nvda, it is nothing but code factory Vocalizer.
I don't know the price of indo nvda, but it maybe expensive than code factory.
I have bought code factory for 6000 INR, and maybe indo nvda is more expensive than it.
Also the code factory services too bad.
I did mail them to many times, but the frequency of getting reply is very less.
Other here mention, I don't used that. But I suggest, Take a good trial, then purchase.
Thank you



On Sat, May 14, 2022 at 1:03 PM mr Krit Kumar kedia <kritparagkedia@...> wrote:
Hello,
I heard the messages above, and I think you are finding a good vocaliser to use with NVDA.
I have a  suggestion for you,
try out INDO NVDA!
It is a software almost the NVDA infact mostly NVDA! which offers vocalizer support, and other  alequence voices as well produced by Saksham!
It's  a paid software, but really helpful.

Best,
Thank you,
Krit Kedia 
diving into the world of technology!
+91, India 



On Sat, May 14, 2022 at 9:59 AM Bhavya shah <bhavya.shah125@...> wrote:
Dear Rui,

That sounds great. Is a demo/trial version available? I am reading
your documentation and it says: "... if you want to try out the
product before you buy it, please contact Tiflotecnia, Lda or your
local Vocalizer for NvDA dealer." Please let me know if I should be
reaching out to you or another representative offlist.

Thanks.

On 5/12/22, Rui Fontes <rui.fontes@...> wrote:
> The driver for the old Vocalizer is already updated on the web page...
>
>
> The direct link is:
>
> https://www.tiflotecnia.net/Instal/vocalizer-driver_2.1.3.nvda-addon
>
>
> Best regards,
>
> Rui Fontes
> Tiflotecnia, Lda.
>
>
>
> Às 23:41 de 12/05/2022, David Mehler escreveu:
>> Hello,
>>
>> Also with regards Vocalizer will the 2.1 nvda.addon be updated for
>> 2022.1 compatibility?
>>
>> Thanks.
>> DAve.
>>
>>
>> On 5/12/22, Rui Fontes <rui.fontes@...> wrote:
>>> Hello!
>>>
>>>
>>> I'm a bit of a suspect, since I'm from Tiflotecnia...
>>>
>>>
>>> But, let's see:
>>>
>>> * Which, if any, support automatic language switching? Using the
>>>> CodeFactory bundle 1.1 with NVDA 2021.3.5, neither Eloquence nor
>>>> Vocalizer seemed to be able to auto-switch despite that option being
>>>> enabled in Voice Settings.
>>>
>>> Our Vocalizer works very good in that feature...
>>>
>>> And, for people using no latin characters, like chinese, japonese,
>>> cyrilic, hebrew or arabic, even on apps not informing the screen reader
>>> to change language, our Vocalizer changes automatically based on the
>>> type of characters...
>>>
>>>
>>>
>>>> * Which tends to be updated for compatibility with new NVDA releases
>>>> most promptly?
>>>
>>> Ours. We have already the new driver to publish it today or tomorrow...
>>>
>>>
>>>
>>>> * What are other differences that should be accounted for in one's
>>>> decision?
>>>
>>> Our technical support is better andfaster...
>>>
>>>
>>> Rui Fontes
>>>
>>> Tiflotecnia, Lda.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>


--
Kind Regards,
Bhavya Shah
B.S. in Mathematical and Computational Science | Stanford '24
LinkedIn: https://www.linkedin.com/in/bhavyashah125/







--
Regards, Abhishek Raut